返回 产品详情
LDPE , 巴西Braskem , PE LD7001A 共挤薄膜材料
可议
发布时间  2019-07-20 04:25:48
图文介绍 产品参数 联系方式

低密度聚乙烯度聚乙烯(LDPE)是一种塑料材料,它适合热塑性成型加工的各种成型工艺,成型加工性好。 LDPE主要用途是作薄膜产品,还用于注塑制品,医疗器具,药品和食品包装材料,吹塑中空成型制品等
英文名称:low density polyethylene,LDPE定义:主链中平均每1000个碳原子带有约20~30个乙基、丁基或其他支链,密度通常为0.910~0.925g/cm3的聚乙烯。本公司 可以免费提供各种材料物性及各种材质认证 如:SGS  UL   MSDS  ROHS  MDS 等证明  联系电话:13712097787  0769-82863746  QQ:878420697

Braskem PE BF-0323/12HCBraskemLDPE
Braskem PE BF-2021BraskemLDPE
Braskem PE BF323HCBraskemLDPE
Braskem PE CX 7020BraskemLDPE
Braskem PE EB-853/72 (Films)BraskemLDPE
Braskem PE EB-853BraskemLDPE
Braskem PE EF2002BraskemLDPE
Braskem PE EF2126S3BraskemLDPE
Braskem PE EF2222BraskemLDPE
Braskem PE F 7018BraskemLDPE
Braskem PE F-2022/0BraskemLDPE
Braskem PE F-2523BraskemLDPE
Braskem PE G-803BraskemLDPE
Braskem PE IP2418BraskemLDPE
Braskem PE LD 5000ABraskemLDPE
Braskem PE LD 7000 ABraskemLDPE
Braskem PE LD7001ABraskemLDPE
Braskem PE PB-208BraskemLDPE
Braskem PE PB-608BraskemLDPE
Braskem PE PB-681/59BraskemLDPE
Braskem PE PB-681BraskemLDPE
Braskem PE PB-682BraskemLDPE
Braskem PE S 1522BraskemLDPE
Braskem PE TN7006BraskemLDPE
Braskem PE TS7003BraskemLDPE
Braskem PE TS7006BraskemLDPE
Braskem PE TU3001BraskemLDPE
Braskem PE TX7001BraskemLDPE
Braskem PE TX7003BraskemLDPE
物性说明
产品说明
LD7001A is a Low Density Polyethylene produced by High Pressure Process, in Autoclave reactor. Developed for the manufacturing of extruded films. It has high mechanical and impact strength, good processability, high ESCR and good shrinkage.

Additivation:
AntiblockingSlip agent
Application:
Coextruded and shrink films.


Process:
Recommended processing conditions for film extrusion about 200 - 220 °C. The optimum processing conditions will vary according to the type of equipment used and cannot be considered as performance guarantee.
总体 
材料状态 已商用:当前有效
资料 1 Technical Datasheet - ASTM (English)
搜索 UL 黄卡 Braskem
供货地区 
南美洲欧洲 
添加剂 
抗结块剂增滑剂 
性能特点 
低密度高 ESCR(抗应力裂纹)光滑性抗结块性抗撞击性,高可加工性,良好收缩性低
用途 薄膜
机构评级 FDA 21 CFR 177.1520
加工方法 共挤薄膜
物理性能额定值单位制测试方法
比重0.921g/cm3ASTM D792
熔流率 (190°C/2.16 kg)0.34g/10 minASTM D1238
薄膜额定值单位制测试方法
抗张强度  ASTM D882
MD: 断裂, 38 μm30.0MPa 
TD: 断裂, 38 μm25.0MPa 
伸长率  ASTM D882
MD: 断裂, 38 μm280% 
TD: 断裂, 38 μm880% 
落锤冲击 2 (38 μm)130gASTM D1709
埃尔曼多夫抗撕强度 - TD (38 μm)130gASTM D1922
光学性能额定值单位制测试方法
光泽度 (60°, 38.0 μm)61 ASTM D2457
雾度19%ASTM D1003
注射说明
Recommended Coextrusion Conditions:
Temperature Profile: 200°C to 220°C
东莞市恒隆塑胶有限公司
  • 联系人 何生 13712097787 0769-82863746 QQ;878420697
  • 联系电话 86-0769-82863746 13712097787
  • 公司地址 广东 东莞市

工商信息

大家都在看