FEATURES
l One HDMI 1.4 input signal split totwo HDMI4 sink devices
l HDCP 1.3 protocol compliant
l Support CEC
l Support deep color 30bit, 36bit
l Support Blue-Ray 24/50/60fs/HD-DVD/xvYCC
l Digital audio format, as DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
l Support signal retiming
l Support input up to 15metres AWG24 HDMI 1.4 standard cable length,
output up to 25metres AWG24 cable length
l No loss of quality
l Installs in minutes
l Need DC5V/0.2A power supply (from a USB host port or USB chager by the USB cable).
The accessories with the machines:
1. One piece ofUSB cable
2.one piece of Manual
Operating and Connecting:
Connect one cable from HDMI source devices to HDMI Splitter input.
Connect one cable from each display (monitor or projector) to the HDMI Splitter outputs.
Connect 5V power supply to the HDMI 1x2 Splitter by USB cable.
SPECIFICATIONS:
HDMI version…………………………………………….…………………………….. HDMI 1.4
HDCP version…………………………………………………………………………....HDCP1.3
HDMI resolution …………….......24/50/60fs/4K*2K/1080p/1080i/720p/576p/576i/480p/480i
Support video color format …………………………..…………….24bit/deep color 30bit,36bit
Support audio format……………….DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
Max bandwidth……………………………………………………………………………..340MHz
Maxbaud rate……………….…….………………….…………………………………..10.2Gbps
Input/Output TMDS signal ………….…………………………..……...… 0.5~1.5Volts p-p(TTL)
Input/Output DDC signal ……………………………………………..………… 5Volts p-p (TTL)
Input cable distance..…... …………………………….≤15m AWG24 HDMI 1.4standard cable
Output cable distance…………………………….…...≤25m AWG24 HDMI 1.4 standard cable
Max working current……………………………………………………………………….....200mA
Power adapter format..Input: …………...AC (50HZ, 60HZ) :100V-240V; Output: DC5V/0.2A
Operatin2g Temperature range……..…………….……………………………… (-15 to +55℃)
Operating Humidity range………………………….….……….5 to 90%RH (No Condensation)
Dimension (L x W x H)……………………………….……………….………60X55X20 (mm)
Weight…..………………………………………………………..…….…..……………………40g
Notes:
Please use the machine as the instruction listed to keep the long use lifetime of the
machine.
- 1. The machine should be placed at the spot far away from the Damp, High-Temperature, Dusty, Erosive, andoxidative environment.
- 2. All parts will be free from the strong shake, hit, fall.
- 3. Touching the device with the wet hands is prohibited.
- 4. Please turn the power off when the machines is not used for long time.
- 5. Please do not open the cover and do not touch the inside parts.
- 6. Please use the original factory power adaptor.
Before power on, please check the connection line carefully. And make sure that all interfaces are normally connected. The common trouble shooting way shows below:
Serial NO | Trouble Description | Cause and Ways to deal with |
1 | Non-Power-Connencted | 1、 Be sure theUSB cable is correctlyconnected from the device to a USB power supply or USB hsot device 2、Check the power switch if it is in on status. |
2 | No Picture | 1、 Please to make sure that the TV is on and has been connected with the machine,. 2、 To check if the signal source is on and well connected. 3、 Check the system connection quality. 4、 Check if the line is all good quality. 5、Check the cable quality( to see if the cable is compliant with the HDMI V 1.4.. |
3 | Obscure Picture | 1、 To try again to connect the cable to be free from the unsuccessful connection. 2、 HDMI Cable Quality(HDMI Cable is compliant with the HDMI V1.4) |
INTRODUCTION
The HDMI Extender over Single Cat5e/6 with Bi-directional IR extends high definition video and audio signals and IR, at a distance of up to200ft/60m over a single Cat5e/6 cable. Also, it can distribute a HDMI signal to local HDMI output port.Features EDID management, which allows and encourages source and display “handshake” for seamless integration. With only one cost effective Cat5e/6 cable, high definition sources with HDMI outputs can be connected to high definition displays with HDMI inputs over long distances. Deep color video, DTS-HD or Dolby TrueHD audio is supported and compatible with the extender. In addition, the extender is also equipped with bi-directional IR pass-through which allows for source or display control.
The extender includes two units: transmitting unit and receiving unit. The transmitting unit is used to capture the HDMI input with IR signals and carries the signals via one cost effective Cat5e/6 cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR and serial control signals. The extender offers the most convenient solution for HDMI extension over a single Cat5e/6 with long distance capability, and is the perfect solution for any application.
FEATURES
Ø Allows HDMI Audio/Video and IR signals to be transmitted over a single Cat5e/6 cable
Ø Distribute a HDMI signal to local HDMI output port
Ø Bi-directional IR system allowing for control of source or display (IR accessories included)
Ø Smart EDID management
Ø Transmission Range: Extends 1080p resolution up to200ft/60m over a single Cat5e or Cat6 cable
Ø Works with HDMI and HDCP compliant devices
Ø Supports up to 1080p High Definition resolution
Ø Compact design for an easy and flexible installation
SPECIFICATIONS
Video Bandwidth: Single-link 165Mhz [ 4.95Gbps]
Video Support: 480i/480p/720p/1080i/1080p @60Hz
Audio Support: Surround Sound (up to 7.1 ch) or stereo digital audio
Transmission Range: HD [1080p 24-bit color] – up to60m [200ft]
Input TMDS Signal: 3.3 volts
Input DDC Signal: 5.0 volts/P-P
ESD Protection: Human Body model:+/- 8 kV (air-gap discharge)
+/- 4 kV (contact discharge)
PCB stack-up: 4 layouts
HDMI connector: Type A 19 pin female
RJ-45 connector: WE/SS 8P8C
3.5mm connector: (TX and RX) IR Receiver/IR Blaster
MECHANICAL SPECS
Housing: Metal enclosure
Power Supply: 5V1A DC
Power consumption: 2.5 watts (TX); 1.2 watts (RX)
Operation temperature: 32~104 °F
Storage temperature: -4 ~140 °F
Relative humidity: 20~90 % RH (no condensation)
Package Contents:
HDMI Transmitter--------------------------------------------1pcs
HDMI Receiver------------------------------------------------1pcs
Windband IR Tx cable--------------------------------------- 1pcs
windband IR Rx cable --------------------------------------- 1pcs
5V1A DC Power Supply Adaptor------------------------- 2 Pcs
Product Manual-----------------------------------------------1pcs
PANEL DESCRIPTIONS
Transmitting unit
1.HDMIOUT: This slot is where you connect the HDMIinput port of yoursink equipment such asHDMI displayer or HDTV set.
2. EDID: TheExtender cancopy default EDID or TV EDID from the local HDMI output port toHDMI source.
3. IN LED: This LED will work while this device received HDMI signal from HDMI source.
4.HDMI IN: This slot is where you connect the HDMI output port of your source equipment such as DVD/Blu-ray players or Set-Top-Box with an HDMI cable.
5.Power LED: This LED willwork when the device is connected with power supply.
6.CAT6: Connect the CAT output of the transmitter with the CAT input of the receiver with CAT5E/6 cable.
7.IRIN: Connect to the IR Receiver for IR signal reception. Ensure that remote being used is within the direct line-of-sight of the IR receiver
8.IROUT: Connect the IR Blaster cable included in the package for IR signal transmission. Pace the IR blaster in direct line-of-sight of the equipment to be controlled
9.DC 5V: Connect from 5V DC power supply into the unit and connect the adaptor to an AC outlet.
Receiver unit
10.EDID: TheExtender cancopy default EDID or TV EDID from the HDMI output port toHDMI source.
11.LOCK LED: This LED will illuminate when the HDMI signal from the transmitter is stable.
12.HDMI OUT: This slot is to connect the HDMI input port of your display such as an HDTV.
13.Power LED: This LED willwork when the device is connected with power supply.
14.CAT6:Connect the CAT input of the receiver with the CAT output of the transmitter with CAT5E/6 cable.
15.IRIN: Connect to the IR Receiver for IR signal reception. Ensure that remote being used is within the direct line-of-sight of the IR receiver.
16.IROUT: Connect the IR Blaster cable included in the package for IR signal transmission. Pace the IR blaster in direct line-of-sight of the equipment to be controlled.
17.DC 5V: Connect from 5V DC power supply into the unit and connect the adaptor to an AC outlet.
- 联系人 张小姐
- 联系电话 755-33183285-609
- 公司地址 中国广东省深圳市宝安区 松岗洪桥头下围水工业区鑫龙科技园
工商信息
注册号: | 91440300083895814T |
组织机构代码: | 08389581-4 |
税务登记证号: | - |
法定代表人: | 吴满青 |
经营状态: | 开业 |
成立日期: | 2013-11-22 |
营业期限: | 2013-11-22 至 无固定期限 |
年检日期: | 2018-03-28 |
注册资本: | 200万(元) |
企业类型: | 有限责任公司 |
机构类型: | 企业法人 |
所属行业: | - |
行政区划: | 广东省深圳市 |
电话号码: | 137****5935 |
登记机关: | 深圳市市场监督管理局 |
所在地址: | 深圳市光明新区公明街道合水口文阁路中裕绿色高新产业园B栋12楼C区 |
经营范围: | 数码、通信、安防、移动电源、蓝牙电子产品的研发与销售;国内贸易,货物及技术进出口。^数码、通信、安防、移动电源、蓝牙电子产品的生产。 |